Removed requirement for raspi-blinka.py
This commit is contained in:
parent
2a074822bc
commit
9820090acf
GPG Key ID:
C5B8BC7530F8F43F
@ -1,19 +0,0 @@
|
||||
import board
|
||||
import digitalio
|
||||
import busio
|
||||
|
||||
print("Hello, blinka!")
|
||||
|
||||
# Try to create a Digital input
|
||||
pin = digitalio.DigitalInOut(board.D4)
|
||||
print("Digital IO ok!")
|
||||
|
||||
# Try to create an I2C device
|
||||
i2c = busio.I2C(board.SCL, board.SDA)
|
||||
print("I2C ok!")
|
||||
|
||||
# Try to create an SPI device
|
||||
spi = busio.SPI(board.SCLK, board.MOSI, board.MISO)
|
||||
print("SPI ok!")
|
||||
|
||||
print("done!")
|
||||
155
raspi-blinka.py
155
raspi-blinka.py
@ -1,155 +0,0 @@
|
||||
"""
|
||||
Adafruit Raspberry Pi Blinka Setup Script
|
||||
(C) Adafruit Industries, Creative Commons 3.0 - Attribution Share Alike
|
||||
|
||||
Written by Melissa LeBlanc-Williams for Adafruit Industries
|
||||
"""
|
||||
|
||||
import os
|
||||
import sys
|
||||
|
||||
try:
|
||||
from adafruit_shell import Shell
|
||||
except ImportError:
|
||||
raise RuntimeError("The library 'adafruit_shell' was not found. To install, try typing: sudo pip3 install adafruit-python-shell")
|
||||
|
||||
shell = Shell()
|
||||
shell.group="Blinka"
|
||||
default_python = 3
|
||||
blinka_minimum_python_version = 3.7
|
||||
|
||||
def default_python_version(numeric=True):
|
||||
version = shell.run_command("python -c 'import platform; print(platform.python_version())'", suppress_message=True, return_output=True)
|
||||
if numeric:
|
||||
try:
|
||||
return float(version[0:version.rfind(".")])
|
||||
except ValueError:
|
||||
return None
|
||||
return version
|
||||
|
||||
def get_python3_version(numeric=True):
|
||||
version = shell.run_command("python3 -c 'import platform; print(platform.python_version())'", suppress_message=True, return_output=True)
|
||||
if numeric:
|
||||
return float(version[0:version.rfind(".")])
|
||||
return version
|
||||
|
||||
def check_blinka_python_version():
|
||||
"""
|
||||
Check the Python 3 version for Blinka (which may be a later version than we're running this script with)
|
||||
"""
|
||||
print("Making sure the required version of Python is installed")
|
||||
current = get_python3_version(False)
|
||||
current_major, current_minor = current.split(".")[0:2]
|
||||
required_major, required_minor = str(blinka_minimum_python_version).split(".")[0:2]
|
||||
|
||||
if int(current_major) >= int(required_major) and int(current_minor) >= int(required_minor):
|
||||
return
|
||||
|
||||
shell.bail("Blinka requires a minimum of Python version {} to install, current one is {}. Please update your OS!".format(blinka_minimum_python_version, current))
|
||||
|
||||
def sys_update():
|
||||
print("Updating System Packages")
|
||||
if not shell.run_command("sudo apt-get update --allow-releaseinfo-change"):
|
||||
shell.bail("Apt failed to update indexes!")
|
||||
print("Upgrading packages...")
|
||||
if not shell.run_command("sudo apt-get -y upgrade"):
|
||||
shell.bail("Apt failed to install software!")
|
||||
|
||||
def set_raspiconfig():
|
||||
"""
|
||||
Enable various Raspberry Pi interfaces
|
||||
"""
|
||||
print("Enabling I2C")
|
||||
shell.run_command("sudo raspi-config nonint do_i2c 0")
|
||||
print("Enabling SPI")
|
||||
shell.run_command("sudo raspi-config nonint do_spi 0")
|
||||
print("Enabling Serial")
|
||||
if not shell.run_command("sudo raspi-config nonint do_serial_hw 0", suppress_message=True):
|
||||
shell.run_command("sudo raspi-config nonint do_serial 0")
|
||||
print("Enabling SSH")
|
||||
shell.run_command("sudo raspi-config nonint do_ssh 0")
|
||||
print("Enabling Camera")
|
||||
shell.run_command("sudo raspi-config nonint do_camera 0")
|
||||
print("Disable raspi-config at Boot")
|
||||
shell.run_command("sudo raspi-config nonint disable_raspi_config_at_boot 0")
|
||||
|
||||
def update_python():
|
||||
print("Making sure Python 3 is the default")
|
||||
if default_python < 3:
|
||||
shell.run_command("sudo apt-get install -y python3 git python3-pip")
|
||||
shell.run_command("sudo update-alternatives --install /usr/bin/python python $(which python2) 1")
|
||||
shell.run_command("sudo update-alternatives --install /usr/bin/python python $(which python3) 2")
|
||||
shell.run_command("sudo update-alternatives --skip-auto --config python")
|
||||
|
||||
def update_pip():
|
||||
print("Making sure PIP and setuptools is installed")
|
||||
shell.run_command("sudo apt-get install --upgrade -y python3-pip python3-setuptools")
|
||||
|
||||
def install_blinka(user=False):
|
||||
print("Installing latest version of Blinka locally")
|
||||
shell.run_command("sudo apt-get install -y i2c-tools libgpiod-dev python3-libgpiod")
|
||||
pip_command = "pip3 install --upgrade"
|
||||
username = None
|
||||
if user:
|
||||
username = os.environ["SUDO_USER"]
|
||||
shell.run_command(f"{pip_command} RPi.GPIO", run_as_user=username)
|
||||
shell.run_command(f"{pip_command} adafruit-blinka", run_as_user=username)
|
||||
|
||||
# Custom function to run additional commands for Pi 5
|
||||
def check_and_install_for_pi5(pi_model):
|
||||
if pi_model.startswith("RASPBERRY_PI_5"):
|
||||
print("Detected Raspberry Pi 5, applying additional fixes...")
|
||||
os.system("sudo apt remove python3-rpi.gpio")
|
||||
os.system("pip3 install rpi-lgpio")
|
||||
else:
|
||||
print(f"Detected {pi_model}, no additional fixes needed.")
|
||||
|
||||
def main():
|
||||
global default_python
|
||||
shell.clear()
|
||||
# Check Raspberry Pi and Bail
|
||||
pi_model = shell.get_board_model()
|
||||
print("""This script configures your
|
||||
Raspberry Pi and installs Blinka
|
||||
""")
|
||||
print("{} detected.\n".format(pi_model))
|
||||
if not shell.is_raspberry_pi():
|
||||
shell.bail("Non-Raspberry Pi board detected. This must be run on a Raspberry Pi")
|
||||
os_identifier = shell.get_os()
|
||||
if os_identifier != "Raspbian":
|
||||
shell.bail("Sorry, the OS detected was {}. This script currently only runs on Raspberry Pi OS.".format(os_identifier))
|
||||
if not shell.is_python3():
|
||||
shell.bail("You must be running Python 3. Older versions have now been deprecated.")
|
||||
shell.check_kernel_update_reboot_required()
|
||||
python_version = default_python_version()
|
||||
if not python_version:
|
||||
shell.warn("WARNING No Default System python tied to the `python` command. It will be set to Version 3.")
|
||||
default_python = 0
|
||||
if not shell.prompt("Continue?"):
|
||||
shell.exit()
|
||||
elif int(default_python_version()) < 3:
|
||||
shell.warn("WARNING Default System python version is {}. It will be updated to Version 3.".format(default_python_version(False)))
|
||||
default_python = 2
|
||||
if not shell.prompt("Continue?"):
|
||||
shell.exit()
|
||||
sys_update()
|
||||
check_blinka_python_version()
|
||||
set_raspiconfig()
|
||||
update_python()
|
||||
update_pip()
|
||||
install_blinka(True)
|
||||
|
||||
# Check and install for Pi 5 if detected
|
||||
check_and_install_for_pi5(pi_model)
|
||||
|
||||
# Done
|
||||
print("""DONE.
|
||||
|
||||
Settings take effect on next boot.
|
||||
""")
|
||||
shell.prompt_reboot()
|
||||
|
||||
# Main function
|
||||
if __name__ == "__main__":
|
||||
shell.require_root()
|
||||
main()
|
||||
30
setup.sh
30
setup.sh
@ -64,7 +64,7 @@ PROJECT_DIR="/home/$USER/Desktop/temp-sensor"
|
||||
if [ ! -d "$PROJECT_DIR" ]; then
|
||||
echo -e "$line\nCreating 'temp-sensor' in Desktop directory for current user.\n$line\n"
|
||||
mkdir -p "$PROJECT_DIR"
|
||||
cp "./raspi-blinka.py" "./temp-calc.py" "$PROJECT_DIR/"
|
||||
cp "./temp-calc.py" "./blinka-test.py" "$PROJECT_DIR/"
|
||||
echo -e "$line\nCreated '$PROJECT_DIR' directory.\n$line\n"
|
||||
else
|
||||
echo -e "$line\n$PROJECT_DIR already exists. Please delete the folder before running this script.\n$line\n\nExiting..."
|
||||
@ -73,17 +73,37 @@ fi
|
||||
|
||||
# Create and activate Python virtual environment
|
||||
cd "$PROJECT_DIR/"
|
||||
chmod ugo+x ./raspi-blinka.py ./temp-calc.py
|
||||
chmod 444 ./temp-calc.py ./blinka-test.py
|
||||
python3 -m venv . --system-site-packages
|
||||
echo -e "$line\nVirtual environment created.\n$line\n"
|
||||
echo -e "$line\nActivating virtual environment...\n$line\n"
|
||||
source $PROJECT_DIR/bin/activate
|
||||
|
||||
echo -e "$line\nInstalling dependencies...\n$line\n"
|
||||
pip3 install --upgrade setuptools click adafruit-python-shell adafruit-circuitpython-dht
|
||||
pip3 install --upgrade setuptools click adafruit-python-shell adafruit-circuitpython-dht RPi.GPIO adafruit-blinka libgpiod
|
||||
|
||||
echo -e "$line\nSetting up raspiberry pi...\n$line\n"
|
||||
sudo raspi-config nonint do_i2c 0
|
||||
sudo raspi-config nonint do_spi 0
|
||||
sudo raspi-config nonint do_serial_hw 0
|
||||
sudo raspi-config nonint do_ssh 0
|
||||
sudo raspi-config nonint do_camera 0
|
||||
sudo raspi-config nonint disable_raspi_config_at_boot 0
|
||||
|
||||
if [! dpkg -l | grep -q i2c-tools]; then
|
||||
sudo apt install -y i2c-tools
|
||||
fi
|
||||
if [! dpkg -l | grep -q libgpiod-dev]; then
|
||||
sudo apt install -y i2c-tools
|
||||
fi
|
||||
if [! dpkg -l | grep -q python3-libgpiod]; then
|
||||
sudo apt install -y i2c-tools
|
||||
fi
|
||||
|
||||
python3 ./blinka-test.py
|
||||
echo -e "$line\nSetup complete\n$line\n"
|
||||
# sudo python3 raspi-blinka.py
|
||||
|
||||
echo -e "$line\nSetting up raspi-blinka...\n$line\n"
|
||||
sudo python3 raspi-blinka.py
|
||||
|
||||
echo -e "\n\n\n$line$line$line\nSetup completed.\nExecute the command 'python3 temp-calc.py' to calculate\nthe temperature.\n# DESIGNED AND ENGINEERED BY KSHITIJ.\n# END OF SCRIPT\n$line$line$line\n\n\n"
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user