# IoT Connections [Refer Raspberry Pi pinout diagram](https://git.kska.io/sppu-te-comp-content/InternetOfThingsAndEmbeddedSystems/src/branch/main/Practical/Raspberry%20Pi%20%282+3+4+5%29%20GPIO%20Pinout.png) ![Raspberry Pi PINOUT](https://git.kska.io/sppu-te-comp-content/InternetOfThingsAndEmbeddedSystems/raw/branch/main/Practical/Raspberry%20Pi%20%282+3+4+5%29%20GPIO%20Pinout.png) ## Assignment 2 - LEDs and Buzzer > [!IMPORTANT] > Long terminal in LED is always positive, short terminal is always negative. ### Single LED **Device** | **Positive terminal** | **Negative terminal (Ground/GND)** | **Signal/Output** --- | --- | --- | --- LED | GPIO 16 (PIN 36) | GROUND (PIN 34) | N/A ### Two LEDs **Device** | **Positive terminal** | **Negative terminal (Ground/GND)** | **Signal/Output** --- | --- | --- | --- LED 1 | GPIO 16 (PIN 36) | GROUND (PIN 34) | N/A LED 2 | GPIO 26 (PIN 37) | GROUND (PIN 39) | N/A ### Buzzer with one LED **Device** | **Positive terminal** | **Negative terminal (Ground/GND)** | **Signal/Output** --- | --- | --- | --- Buzzer | GPIO 16 (PIN 36) | GROUND (PIN 34) | N/A LED | GPIO 26 (PIN 37) | GROUND (PIN 39) | N/A ## Assignment 3 - IR Sensor **Device** | **Positive terminal** | **Negative terminal (Ground/GND)** | **Signal/Output** --- | --- | --- | --- IR Sensor | 5V power (PIN 2) | GROUND (PIN 34) | GPIO 16 (PIN 36) LED | GPIO 26 (PIN 37) | GROUND (PIN 39) | N/A ## Assignment 4 - DHT11 (Temperature sensor) **Device** | **Positive terminal** | **Negative terminal (Ground/GND)** | **Signal/Output** --- | --- | --- | --- DHT11 | 5V power (PIN 2) | GROUND (PIN 34) | GPIO 16 (PIN 36) ## Assignment 5 - Camera **Device** | **Positive terminal** | **Negative terminal (Ground/GND)** | **Signal/Output** --- | --- | --- | --- Picamera | N/A | N/A | CSI port ## Water level **Device** | **Positive terminal** | **Negative terminal (Ground/GND)** | **Signal/Output** --- | --- | --- | --- Water sensor | 5V power (PIN 2) | GROUND (PIN 34) | GPIO 16 (PIN 36) LED | GPIO 26 (PIN 37) | GROUND (PIN 39) | N/A ---